Jianye Xu, Yinma Electric
Transformer Manufacturer in China · Yueqing · Engineer and CEO
At the workshop in Yueqing, leadership is demonstrated through hands-on work, not showroom slogans. Jianye Xu founded this Chinese transformer manufacturer and remains closely involved in production. If something is not right, he stops the shipment. When a customer or an on-site team needs him, he travels from China to be there in person.

Business Owner, Front-Line Engineer, and Quality Supervisor
Jianye Xu is the CEO of Yinma Electric, but the title only tells part of the story. Day to day, he is found beside the winding equipment and remains one of the last people able to stop a shipment from leaving the factory.
Business Owner
He founded Yinma Electric in Yueqing in 2014 and still personally prepares technical agreements for export orders. Here, leadership is not about speeches in a conference room; it means being willing to put his name to the drawings.
Hands-On Engineer
Electrical equipment manufacturing runs through his family. He has been around the equipment since childhood and has spent nearly four decades in the industry. He still checks cores, windings, and transformer tanks on the shop floor. When deadlines are tight, he works alongside the production team—at the Yueqing factory and, when necessary, at installation sites in Africa.
Quality Supervisor
Tight schedules and low prices are never reasons to release nonconforming equipment. Clearances, corrosion protection, welds, and nameplates must all be right; otherwise, the unit stays. When the team is uncertain, they still ask him to take a look.
Yinma Electric: Based in China’s Electrical Manufacturing Hub
Yueqing, Zhejiang, is widely known as one of China’s major hubs for electrical manufacturing, with a long-established industrial base.
Jianye Xu was born here. His family has long been involved in electrical equipment manufacturing, so he grew up around the industry. He has remained in the field for nearly four decades.
Yinma Electric Co., Ltd. is a Chinese electrical equipment manufacturer. Its main products include oil-immersed and dry-type distribution transformers, YB prefabricated substations, and low-voltage switchgear such as MNS and GGD panels. His office, shown in the photographs, is simple: a computer, a picture, and a small ornament. More often, this transformer manufacturer’s founder can be found on the production floor or in the quality inspection area.
He does not claim to know every electrical product on the market. The invention and utility-model patents bearing his name reflect areas of electrical engineering in which he has developed and protected specific designs.

Integrity and Principles Are Non-Negotiable
People who work with him may describe him differently, but their message is consistent: he does not play games with pricing, and he is uncompromising about standards.
State Ratings Accurately
If the site requires 11 kV, he will not gamble on supplying equipment with a 10 kV nameplate. If a withdrawable unit cannot withstand the specified Icw, he says so plainly. Technical integrity matters: a mistake on paper remains a mistake after the switch is closed.
Never Compromise Materials to Win an Order
Electrical steel, copper, enclosures, and assembly clearances are not costs he is willing to cut just to win a price war. He would rather lose a bid than ship underbuilt equipment that fails the following year and disrupts the customer’s operations.
Return Incomplete or Incorrect RFQs
He will return a request for quotation if it applies specifications to the wrong product category. Voltage, capacity, Icw, IP rating, altitude, and ambient temperature must be considered before a model number. This is engineering discipline, not a race to maximize order volume.
Stay Close to Production
A business owner who never inspects a transformer tank cannot properly check one. He treats the production line as part of the design process, and the team knows he will take measurements himself. Before a young fitter closes an enclosure, they may still wait for his approval.
The goal is not to sell customers the most expensive product. It is to understand their needs and build equipment that suits them. We do not engage in a race to the bottom on price. Good materials and sound workmanship are what help reduce failure rates and hidden risks.
Designed for the Site. Built to Perform Reliably.
He often says that properly manufactured equipment should not bring a site to a halt because of production defects. This is a shop-floor principle, not a promise of a ten-year warranty. Warranty terms are governed by the contract.
If an African customer sends only a model number, he first asks about the load, altitude, ambient temperature, protection requirements, and short-circuit level. As a Chinese transformer manufacturer, Yinma would rather submit a quotation later and get it right than rush out an under-specified offer. Xu personally works through the technical agreement, comparing applicable GB requirements with IEC 60076, IEC 62271-202, or IEC 61439-2, depending on the equipment category actually required at the site.
When Customers or Site Teams Need Him, He Travels from China
He is not a business owner who only signs documents in Yueqing. When customers or site teams in Africa need him in person, he boards a plane.
Technical agreements written in Zhejiang must still work amid red soil, altitude, high temperatures, and power networks that may differ from the drawings. When a problem cannot be resolved through messages, he goes in person—to support commissioning, investigate rating discrepancies, or work directly with teams that need a designated engineer on site. It is the same principle he follows in the factory: he would rather stand beside the equipment himself than argue from a photograph.

The photograph captures an ordinary working day: the ground, a sign, and colleagues. It does not mean Yinma was the contractor for the entire power station. It shows that when the engineer who signed off on the technical drawings is needed on site, he is willing to be there in Africa.
ISO Certificates Hang on the Wall; Quality Still Walks the Shop Floor
Yinma Electric holds ISO 9001, ISO 14001, and ISO 45001 certifications, shown below. These certifications relate to management systems; they do not replace the person who still opens and inspects transformer tanks.
When a tender requires certificates, Yinma provides them. But inspection cannot rely on certificates alone. Xu uses management systems to give younger staff a consistent method, while continuing to inspect equipment himself so that the process remains meaningful. These certificates are not product type-test reports. The S11-M, SCB18, YB-12, and MNS product families require their own applicable GB/IEC evidence. Customs clearance in African markets may also require a Certificate of Conformity (CoC) for the destination country.
An Engineer’s Patents Do Not Replace Type Testing
The patents list Jianye Xu as the inventor and Yinma Electric as the patent holder. They indicate the designs and engineering ideas he has chosen to protect.
The invention patent shown below concerns an intelligent prefabricated substation. The utility-model patents also relate to product categories manufactured by the company, including low-noise transformers, dry-type transformers, withdrawable low-voltage switchgear, reactive power compensation equipment, ring main units, and prefabricated substations with tripping functions. Consult the scanned documents for the legal details. A patent is not a substitute for type testing.
Utility-Model Patents from the Same Factory
What You Get When You Contact Him
Yinma Electric is a Chinese manufacturer of electrical equipment, a founder who still inspects equipment, and a technical agreement written around site requirements—not simply the lowest price per kVA.
The Person
Jianye Xu — founder, hands-on engineer, and quality supervisor. Born in Yueqing, he has spent nearly four decades in the electrical industry.
The Factory
Yinma Electric, Yueqing, Zhejiang, China. Manufacturer of distribution transformers, prefabricated substations, and low-voltage switchgear. Address: No. 358 Chengxi Road.
How RFQs Are Reviewed
Load requirements come first. Requests that specify the wrong equipment category are returned. Under-specified equipment is not dressed up as a bargain. If the site team needs him, he will travel.
What to Request
Use this page to learn about the manufacturer and the relevant product pages (S11-M / SCB18 / YB-12 / MNS) for equipment details. Check the destination country’s CoC requirements for customs clearance. Patents are not type-test reports, and ISO certificates are not routine test records.
Questions Buyers Often Ask
Is he just the owner?
No. He is the CEO, remains active on the shop floor in Yueqing, and is one of the final quality checkpoints. When a project in Africa requires his presence, he is willing to travel. He also writes the technical articles on this site.
Manufacturer or trading company?
Yinma is a manufacturer based in Yueqing, producing transformers, prefabricated substations, and low-voltage switchgear—not simply a trading desk reselling products from a catalogue.
Can a patent replace type testing?
No. A patent protects a design; type testing evaluates a sample against the applicable product standard.
How should buyers evaluate the factory?
Review whether the technical agreement reflects the actual site requirements, see who is present on the shop floor, and ask whether the company will reject equipment that is cheap but unsuitable. Then request the relevant type-test evidence and the destination country’s CoC, where required.
Send Us the Site Data, Not Just a Model Number
Transformer Manufacturer in China · Yueqing · Jianye Xu
The same engineer who walks the shop floor will help prepare the technical agreement with reference to IEC 60076, IEC 62271-202, or IEC 61439-2, as applicable. If the equipment is not right for the job, he will say so.













