Conquering the Roof of the World
S13 Transformers for One of the World's Largest Hydropower Projects
From Wenzhou to Medog: How Yinma Electric's S13 Series Oil-Immersed Transformers Are Engineered for a Canyon That Runs From 600 m to 3,000 m

When Wenzhou Manufacturing Meets the World's Summit
On July 19, 2025, Chinese Premier Li Qiang officially announced the full-scale launch of the Yarlung Tsangpo River downstream hydropower project — with the Medog Hydropower Station at its core. This is the largest energy infrastructure project in human history.
At the heart of this super-engineering marvel, two Yinma Electric S13 oil-immersed transformers — S13-12500KVA/35KV/10KV and S13-10000KVA/35KV/10KV — undertake the critical mission of stepping down and distributing power across the most challenging terrain on Earth.
Extreme Environment: The Ultimate Stress Test
Engineers describe building Medog as "stacking blocks on tofu." The environmental challenges are among the most severe any electrical equipment has ever faced.
High Altitude & Low Pressure
The project corridor runs from roughly 600 m at the canyon outlet to about 3,000 m at the intake area. At the high end air density drops by about 30%, cutting natural cooling efficiency and insulation strength — the reason altitude-compensated design is mandatory.
Seismic Zone — Magnitude 8.5+
Located in the Himalayan seismic belt, facing threats from earthquakes up to 8.5 magnitude. Equipment must withstand violent ground motion while maintaining structural and electrical integrity.
Extreme Temperature Swings
Diurnal swings exceed 30°C at the intake area, while the powerhouse sits in a subtropical canyon with year-round humidity. One project, two climates — the equipment has to tolerate both.
Logistics Hell — 4,000 km Journey
From Wenzhou factory to Medog site: highways → G318 Sichuan-Tibet Highway (5,000m+ passes) → narrow mountain roads. Equipment must survive shock, tilt, and altitude changes intact.
S13 Series: Engineered for the Impossible
S13 represents China's Tier-1 energy efficiency standard for oil-immersed distribution transformers. Yinma Electric's customizations for Medog push this platform beyond its design envelope. Note on product class: the 12,500 kVA and 10,000 kVA units are power transformers built to IEC 60076 / GB 1094, with no-load and load losses controlled at S13-grade levels.
| Parameter | S13-12500KVA/35KV/10KV | S13-10000KVA/35KV/10KV |
|---|---|---|
| Rated Capacity | 12,500 KVA | 10,000 KVA |
| Voltage Ratio | 35 KV / 10 KV | 35 KV / 10 KV |
| Tap Changer | Off-circuit, ±3×2.5% | Off-circuit, ±3×2.5% |
| Vector Group | Yd11 | Yd11 |
| Cooling | ONAN (Oil Natural Air Natural) | ONAN (Oil Natural Air Natural) |
| Core Material | High-permeability silicon steel, stepped-lap joint | High-permeability silicon steel, stepped-lap joint |
| Winding Material | Oxygen-free copper (≥101% IACS) | Oxygen-free copper (≥101% IACS) |
| Efficiency Class | GB Tier-1 (S13 Standard) | GB Tier-1 (S13 Standard) |
| No-Load Loss | 25–30% lower than S11 | 25–30% lower than S11 |
| Noise Level | ≤65 dB (Lp, 1 m) | ≤65 dB (Lp, 1 m) |
| Standards | GB1094, GB/T6451, JB/T10088 |
Medog-Specific Engineering Upgrades
Standard S13 transformers cannot survive Medog. Yinma Electric implemented six critical upgrades for high-altitude, high-seismic, and high-humidity operation.
Reinforced External Insulation
Creepage and clearance distances increased by 30% to compensate for reduced dielectric strength at the 3,000 m intake area. Bushings upgraded to high-altitude rated silicone rubber type.
Special Transformer Oil
Ultra-low pour point oil (-45°C) with high flash point and excellent oxidation stability. Vacuum oil-filling eliminates dissolved gases and moisture.
Anti-Seismic Structural Design
Core clamping force increased by 40%. Winding end blocks reinforced with epoxy resin. All fasteners use dual-lock washers and thread-locking compound.
Thermal Compensation System
Enhanced radiator fin design with 20% additional surface area. Oil circulation channels optimized for low air-density cooling. Thermal expansion joints prevent tank deformation.
Triple-Protection Coating
Tank surface: degrease → phosphating → three-proof paint (anti-moisture, anti-mold, anti-salt-spray). Seals upgraded to fluororubber for -40°C to +150°C range.
Fully Sealed Conservator
Diaphragm-type conservator with nitrogen cushion completely isolates oil from atmosphere, preventing oxidation and moisture ingress over a 30-year design life.
From Factory Floor to Mountain Peak
Yinma Electric doesn't just sell transformers — we deliver end-to-end project assurance, from raw material inspection to final commissioning on site.
1. Precision Manufacturing — Wenzhou Factory
Automated core stacking, constant-tension winding, vacuum drying (moisture ≤0.5%), and full-item factory testing: no-load loss, load loss, temperature rise, impulse withstand, partial discharge.
2. Shock-Proof Packaging & Logistics
Full wooden crate with elastomeric shock mounts. Oil-level telemetry monitors real-time tilt and vibration during the 4,000 km journey across plains, mountains, and 5,000m+ passes.
3. On-Site Installation — Medog, Tibet
Yinma engineers accompany equipment to site. Tasks: positioning, oil filling, hot-oil circulation, bushing installation, HV/LV termination, and full commissioning tests under low-oxygen conditions.
4. Commissioning & Handover
Insulation resistance, ratio, DC resistance, withstand voltage, and system integration tests. Full documentation package and operator training delivered before commercial operation.
If It Works at 3,000 m and in a Subtropical Canyon, It Works Anywhere
Africa's power infrastructure faces challenges remarkably similar to Medog — high altitudes, weak grids, extreme climates, and limited maintenance access. Medog is our proof of concept for Africa.
Mega Hydropower & Grid
Grand Ethiopian Renaissance Dam, Inga Dam (DRC), and other cascade developments require reliable step-down transformers for 35KV/10KV distribution networks.
Mining & Heavy Industry
Copper belt (Zambia/DRC), gold mines (Ghana/South Africa), and cement plants need continuous-duty transformers with high overload tolerance and low total cost of ownership.
Urban & Critical Infrastructure
Airports, ports, railways, hospitals, and data centers demand transformers with low noise, high efficiency, and proven reliability in tropical and subtropical climates.
Renewable Energy Integration
Solar farms (North Africa, Sahel) and wind parks (East Africa, South Africa) need grid-compliant transformers for voltage step-up/down and reactive power management.
Medog validates what we promise Africa: a transformer engineered to survive the Himalayas will thrive in the Sahara, the Congo Basin, or the Ethiopian Highlands. Reliability isn't claimed — it's proven.
The Yinma Electric Advantage
| Capability | Yinma Electric Specification |
|---|---|
| Product Range | Oil-immersed (S11/S13/S20/S22), Dry-type, Pad-mounted substations — 30 KVA to 25,000 KVA |
| Voltage Classes | 10 KV, 35 KV, 110 KV and below |
| Customization | High-altitude, extreme-cold, tropical-humid, explosion-proof, mining-certified variants |
| Energy Efficiency | Tier-1 (S13) and Tier-2 (S20) full series coverage |
| Certifications | ISO 9001, ISO 14001, CCC, CQC Energy-Saving Certification |
| Export Experience | 30+ countries across Southeast Asia, Middle East, Africa, and South America |
| Service Model | Design consultation → Manufacturing → Logistics → Installation → After-sales — full chain |
| Response Time | Technical inquiry response within 24 hours; spare parts dispatch within 72 hours |
Powering the Future
From Medog to Africa
We invite power engineering partners, EPC contractors, and energy investors across Africa to explore how Yinma Electric's proven high-altitude technology can solve your most demanding distribution challenges.









