From Songzi Bailonggeng Water Plant to African Public Projects
KYN28 MV Switchgear + SCB14 Dry-Type Transformer High-Reliability Solution
A complete power distribution package for the Bailonggeng Water Plant in Songzi, Hubei: 18 KYN28 MV switchgear units and 3 SCB14 dry-type transformers carrying a 350,000 m³/day dual-quality supply scheme for 225,000 residents — proven for African water, wastewater, and public-building projects.

Bailonggeng Water Plant: High Demands on Public-Service Power
Located in Laocheng Town, Songzi, Jingzhou, Hubei Province, Bailonggeng Water Plant supplies drinking water to about 225,000 residents across the city's northern hill townships and eastern plains. With a design capacity of 350,000 m³/day under a dual-quality supply model, it is the core project of the city's integrated urban-rural water programme.
At a water plant, one hour without power affects tens of thousands of people; half a day can cause negative pipeline pressure and secondary contamination. This is truly a "not one second of downtime" public-service project. Our complete distribution solution for Bailonggeng — from HV incomers to transformers — is designed to the highest reliability standard: dual-source automatic transfer and fire-safe dry-type transformers ensure that if one feed fails, the other takes over instantly and residents' water supply is unaffected.
Yinma Electric supplied the full distribution package for Bailonggeng Water Plant: 18 KYN28-12 metal-clad withdrawable MV switchgear units (incomer, metering, PT, outgoing, and bus-tie panels), two SCB14-1000 kVA cast-resin dry-type transformers, and one SCB14-800 kVA cast-resin dry-type transformer — covering the raw-water pump house, booster pump house, dosing/chlorination area, and office/living zones across the site. All panels were factory-built and wired; on-site installation and commissioning were completed smoothly with first-time energization success. Through the trial run so far, no HV misoperation, transformer overheating or related fault has been recorded, and the plant meets its 24-hour continuous supply requirement.
Water-Sector Distribution Challenges — Highly Relevant to Africa
Power distribution pain points at water and wastewater plants are global. In many African regions, weak grid stability, limited O&M capability, and hot, humid environments raise the bar for equipment reliability even higher than in domestic projects.
Zero Tolerance for Outages
Water supply, hospitals, and similar public services cannot afford power loss — backup must switch in within seconds. With frequent grid outages across Africa, dual-source design with automatic transfer is essential.
Humid, Wet Environments
Pump houses and chemical dosing areas have high humidity and condensation risk, leading to reduced insulation and transformer moisture ingress. Africa's rainy seasons and flood-prone areas demand strong anti-condensation and moisture protection.
Heavy Motor Inrush Loads
Raw-water and booster pumps are high-power motors with starting currents 5–7× rated current. MV switchgear breaking capacity and transformer inrush withstand must be sized correctly — undersized gear leads to contact burnout and nuisance tripping.
Strict Fire-Safety Requirements
Plant switchrooms are often near offices and water storage. Oil-filled transformers carry leak and fire risk with severe consequences. Fire-safe, explosion-resistant, low-maintenance dry-type transformers are the preferred choice for indoor distribution.
Limited O&M Capability
Public-service operators are not always HV specialists. Equipment must be misoperation-proof, low-maintenance, and easy to repair. With scarce HV electricians in Africa, simple, reliable designs with universal spare parts are especially important.
Derating in High Temperature
Africa's year-round heat and often poor switchroom ventilation mean equipment designed for temperate climates can overheat and trip in summer. Temperature rise must be engineered for 45°C or even 50°C ambient to guarantee full-load operation.
KYN28 MV Switchgear + SCB14 Dry Transformer: A Proven Global Standard
KYN28 metal-clad switchgear and SCB cast-resin dry-type transformers are widely used worldwide for MV distribution. IEC-compliant, with globally available spares, they are a cost-effective choice for African public-service and industrial projects.
KYN28-12 Metal-Clad Withdrawable MV Switchgear
| Parameter | Standard Rating | Project / Africa Adaptation Notes |
|---|---|---|
| Rated Voltage | 12 kV (custom 15 kV / 24 kV / 36 kV) | Supports common African grid voltages: 11 kV / 22 kV / 33 kV |
| Rated Current | 630 A / 1250 A / 2500 A / 3150 A | Covers full current range from small water plants to large industrial sites |
| Rated Short-Circuit Breaking Current | 25 kA / 31.5 kA / 40 kA | High breaking capacity for motor starting and fault surges |
| Protection Degree | IP4X (door closed) | Blocks dust and vermin entry to prevent short-circuit faults |
| Circuit Breaker Type | VS1 vacuum circuit breaker | Maintenance-free; 10,000+ operating cycles; long service life |
| Interlocking | Full five-protection mechanical interlock | Structurally prevents misoperation — safe even for non-specialists |
| Standards | GB3906 / IEC 62271-200 | International standards accepted by African utilities |
SCB14 Epoxy-Cast Dry-Type Transformer
| Parameter | Standard Rating | Project / Africa Adaptation Notes |
|---|---|---|
| Rated Capacity | 30 kVA – 2500 kVA | This project uses 800 / 1000 kVA; full range available |
| Voltage Class | 10 kV / 0.4 kV (custom 11 kV / 22 kV / 33 kV) | Matched to MV distribution voltages across African countries |
| Insulation Class | Class F (155°C max) | High thermal margin — no nuisance tripping in African heat |
| Efficiency Class | Level 1 (SCB14 series) | No-load loss ~20% lower than SCB13 — lower long-term energy cost |
| Cooling Method | AN / AF (natural / forced air) | Short-term 1.5× overload capability for motor starting surges |
| Protection Degree | IP00 (custom IP20 / IP23 / IP54 enclosure) | Outdoor, dust-proof, and rain-proof enclosures available |
| Safety Features | Fire-resistant, non-explosive, flame-retardant, non-toxic | Safe for indoor installation in occupied buildings |
| Maintenance | Maintenance-free; periodic dust removal only | No oil changes — simple field O&M in Africa |
Six Core Design Features for Fail-Safe Public-Service Power
Every design choice at Bailonggeng targets real pain points in public-service and African field conditions — reducing failure risk and O&M burden at the source.
Dual-Source Automatic Transfer
Dual 10 kV incomers with bus-tie automatic transfer: if one source fails, the other closes within 0.5 seconds — pump motors stay running and water supply continues. Ideal for Africa's frequent grid outages.
Reinforced Insulation for All Conditions
KYN28 panels use extended creepage insulators and anti-condensation heaters to prevent flashover in rainy seasons. SCB14 epoxy-cast insulation resists moisture and dust — reliable even at 95% humidity without breakdown.
Motor-Dedicated Protection
Pump outgoing panels include motor protection relays with start-timeout, overcurrent, locked-rotor, and phase-loss functions — blocking inrush without nuisance trips while acting precisely on real faults to protect switchgear and transformers.
Five-Protection Interlock — Zero Misoperation
Full mechanical five-protection interlocking on KYN28 — no electrical logic required — prevents racking breakers under load, incorrect switching, energizing with earth switch closed, and entry into live compartments. Safe for non-specialist operators.
High-Temperature Rise Design
All equipment temperature rise rated for 50°C ambient. Oversized main busbars and Class F dry transformers tested to Class H margins — full-load operation without overheating tripping, even in uncooled African switchrooms.
Standardized, Maintenance-Free Design
Breakers, CTs, and accessories use internationally standard models — spares available locally in Africa. Vacuum breakers and dry transformers need no oil changes or periodic adjustment; routine dust cleaning during planned outages keeps O&M cost minimal.
Construction Complete — Trial Operation Underway
The Bailonggeng Water Plant expansion finished 18 months of construction and entered trial operation on 20 October 2026. For the 15-day trial window, Yinma's KYN28 switchgear and SCB14 dry-type transformers carry the plant's full process load — water quality, pressure, equipment condition and distribution-network capacity are all being verified under real operating conditions.
1. Civil & Process Works Completed
Eighteen months of construction completed across a 160.7-acre site in Bailonggeng Village, including clean-water, sedimentation, filtration and disinfection units.
2. Trial Operation — 20 October 2026
A 15-day trial run with dedicated technicians on shift, verifying water quality, water pressure, equipment condition and the conveying capacity of the supporting pipe network.
3. Consolidated Trial Report
A single trial-run report will be compiled as the baseline for long-term operation and maintenance.
4. Formal Operation — Before End 2026
Full commercial operation is targeted before the end of 2026, ending the situation where the Lingang Industrial Park had no dedicated water treatment plant.
Raw water is drawn from the Yangtze at the Songzi reach and treated under a dual-quality supply model that serves both domestic and industrial demand.
Where Does This Solution Apply in Africa?
Africa is in a rapid infrastructure build-out phase — water, public buildings, and industrial parks are expanding. The proven KYN28 + SCB14 combination is one of the best-fit MV distribution solutions for these projects.
1. Water & Wastewater Treatment Plants
Urban water supply gaps across Africa drive new and upgraded plants — identical to Bailonggeng's requirements: dual-source reliable power, moisture and fire protection, and motor-load capability. This solution can be replicated with fast delivery and high reliability.
2. Hospitals / Schools / Government Buildings
Operating theatres, ICUs, and government data centers are Tier-1 loads that cannot lose power, often in occupied buildings requiring fire-safe equipment. SCB14 dry transformers with KYN28 switchgear, backed by diesel generators, deliver uninterrupted supply.
3. Commercial Complexes / Office Towers / Hotels
Major African city developments demand reliable, quiet, fire-safe power. Dry transformers run quietly and install in basements or indoors without a dedicated oil-filled transformer room — saving space and simplifying maintenance.
4. Small Industrial Parks / Processing Plants
Industrial parks, food plants, timber mills, and beverage factories across Africa have significant motor loads requiring MV distribution and indoor transformers. High breaking capacity, inrush tolerance, and easy expansion make this solution ideal for future line additions.
5. Renewable Energy Plant Switchrooms
For solar and storage projects, KYN28 panels serve as grid-connection switchgear and SCB14 dry transformers as station service transformers — proven in numerous domestic PV projects and equally suited to Africa's growing solar market.
African clients often ask: what's the safest choice for public-service distribution? I always recommend KYN28 plus SCB dry transformers — a mature global solution used for decades. No flashy gimmicks: rugged, reliable, low failure rate, easy to maintain. In Africa, fewer faults and fewer outages matter more than any smart parameter or marginal energy saving.
End-to-End Custom Services for African Projects
As a direct manufacturer, we tailor design to each country's grid standards, site environment, and project requirements — from engineering through commissioning, so clients can focus on delivery.
Custom System Engineering
Single-line diagrams, protection schematics, and switchroom layouts based on load, grid voltage, and site conditions — with English technical documentation for local utility acceptance. Full voltage range: 11 kV / 22 kV / 33 kV.
Factory-Built Panels & Transformers
All MV panels fully wired, tested, and high-voltage proof-tested in factory; transformers complete full factory test suite. On site, only incomer/outgoing connections are needed — short installation time, minimal field commissioning.
Tropical Environment Customization
Anti-condensation heaters, reinforced insulation, and high-temperature rise design for African heat and humidity. Stainless-steel and rain/dust-proof enclosures for outdoor or semi-outdoor installation.
Local Certification Support
IEC-compliant products with SONCAP, PVOC, COC, and other African import certifications. We support local utility acceptance and grid connection to avoid certification delays.
On-Site Guidance & Training
Engineers can be dispatched to Africa for installation, commissioning, and energization — plus operator training. Remote video support is also available to ensure correct commissioning.
Spares & After-Sales Support
Consumable spares kits; South Africa and Nigeria warehouses stock vacuum breakers, relays, and fans — dispatch to African countries within 72 hours. Two-year whole-unit warranty with lifetime technical support.
Public-Service Projects — Reliability First
Yinma KYN28 + SCB14 Solution for Africa
The same proven package as Bailonggeng Water Plant — fully customizable for all voltage classes and capacity ratings. African EPCs, municipal authorities, and building contractors are welcome to request a free distribution design and quotation.








